Factory Cheap Hot 3 Way Electric Ball Valve - Globe Valve – Hankun
Factory Cheap Hot 3 Way Electric Ball Valve - Globe Valve – Hankun Detail:
Product Introduction
As an extremely important cut-off valve, the globe valve plays an important role in cutting off and throttling the fluid in the pipeline. Its seal is to apply torque to the valve stem, and the valve stem applies pressure to the valve flap in the axial direction, so that the sealing surface of the valve flap and the sealing surface of the valve seat are closely attached, and the leakage of the fluid along the gap between the sealing surfaces is prevented.
Product Advantages
Cooling water systems where flow needs to be regulated.
Fuel oil systems where flow is regulated and water tightness is of importance.
High-point vents and low-point drains when water tightness and safety are major considerations.
Feed water, chemical feed, condenser air extraction and extraction drain systems.
Boiler vents and drains, main steam vents and drains, and heater drains.
Turbine seals and drains.
Turbine lube oil system.
Valve body: A216 WCB, A351 CF8, A351 CF8M
Valve seat: A105+13Cr, A105+STL, A351 CF8, A351 CF8M
Valve stem: A182 F6a, A182 F304, A182 F316
Valve trim: A216 WCB+13Cr, A216 WCB+STL, A351 CF8, A351 CF8M
Actuator: Electric actuator
Type: Multi-turn
Voltage: 200, 220, 240, 380, 400, 415, 440, 480, 500, 550, 660, 690
Control type: on-off
Series: intelligent
Product detail pictures:
Related Product Guide:
The key to our success is "Good Product Quality, Reasonable Value and Efficient Service" for Factory Cheap Hot 3 Way Electric Ball Valve - Globe Valve – Hankun , The product will supply to all over the world, such as: St. Petersburg, Lesotho, Iran, After years of development, we have formed strong ability in new product development and strict quality control system to ensure excellent quality and service. With the support of many long term cooperated customers, our products are welcomed all over the world.
By Liz from France - 2018.11.11 19:52
Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
By Adam from Paraguay - 2018.06.09 12:42
