Trending Products Pressure Control Valve - Rack and Pinion Ball Valve – Hankun

Single seated valves are one form of globe valves that are very common and quite simple in design. These valves have a few internal parts. They are also smaller than double seated valves and provide good shut-off capability.

Maintenance is simplified due to easy access with top entry to the valve components. Because of their widespread usage, single seated valves are available in a variety of trim configurations, and therefore a greater range of flow characteristics are available. They also produce less vibration due to the reduced plug mass.

Cage Type Single Seated Control Valves are designed for high differential pressure heavy duty service where flashing/cavitation may occur.Further, they are ideal for preventing erosion from the valve body, because their guides are sturdy and the valve body is protected by a cage. The compact valve body, with an S-shaped flow passage that features low pressure loss, allows a large flow capacity and range ability.

The valve plug is highly vibration-resistant as it is held by a top guide section which has a large sliding area. The flow shut-off performance complies with the IEC or JIS Standards. The actuator, integrated with simplest mechanisms, utilizes a compact yet powerful diaphragm actuator loaded with multiple springs.

Cage Type Single Seated Control Valves are widely applicable for reliable control of flows in high or low temperature, high differential pressure process lines.

Inquiry now

Details

Product Introduction

Product Advantages

Double Block And Bleed:

This safety feature eliminates the buildup of pressure due to high pressure media trapped in the valve ‘s body cavity, even while the valve is in the fully closed position. Additionally, secondary graphite body seals and flexible graphite packing prevents leakage through the body joints and stuffing box, respectively.

Internal Trunnion Design:

Upper and lower bearing plates hold the ball in place, preventing the ball from floating axially and avoiding excess load on the seats. External trunnion design is available in certain sizes.

Double Seals On Body Joints:

Primary elastomeric seals ensure zero leakage in standard operating conditions. Secondary graphite seals ensure proper body joint sealing in extreme temperature scenarios.

Pressure Energized Stem Packing:

Our proprietary energizer ring, located above the primary o-ring stem seal, provides insurance in the rare event that the O-ring is damaged by using the media pressure to create an upward compressive force on the packing. This upward force on the packing combined with the downward compressive force created by tightening the packing gland results in a larger net compressive force on the packing and better seal than atypical packing design.

Valve Position Indication:

Clear stamping on the outer diameter of the mounting flange identifies the open or close position of the valve based on the stem key orientation.

Valve body: A216 WCB, A351 CF8, A351 CF8M

Valve stem: A182 F6a, A182 F304, A182 F316

Valve trim: A105+HCr(ENP), A182+F304, A182+F316

Valve seat: RPTFE, A105, A182 F304, A182 F316

Actuator: Pneumatic actuator

Type: Rack and pinion

Voltage: 24, 110, 220

Product detail pictures:

Related Product Guide:

We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate in our success for Trending Products Pressure Control Valve - Rack and Pinion Ball Valve – Hankun , The product will supply to all over the world, such as: Swedish, San Francisco, Italy, Our solutions have national accreditation requirements for qualified, good quality products, affordable value, was welcomed by individuals all over the world. Our products will continue to improve inside the order and appear forward to cooperation with you, Definitely should any of those goods be of curiosity to you, be sure to letus know. We'll be satisfied to supply you a quotation up on receipt of the detailed needs.

3 Way Globe Control Valve